Capture Clip Archive - Pixelfriedhof https://pixelfriedhof.com/en/tag/capture-clip-en/ IT-Blog, Fotoblog, Travelblog, Nerdstuff Mon, 28 Jun 2021 17:29:17 +0000 en-US hourly 1 https://wordpress.org/?v=6.8.3 https://pixelfriedhof.com/wp-content/uploads/2022/02/cropped-My-project-3-32x32.png Capture Clip Archive - Pixelfriedhof https://pixelfriedhof.com/en/tag/capture-clip-en/ 32 32 Insert Peak Design Capture Clip into DJI Ronin RS 2 and RSC 2 https://pixelfriedhof.com/en/insert-peak-design-capture-clip-into-dji-ronin-rs-2-and-rsc-2/ https://pixelfriedhof.com/en/insert-peak-design-capture-clip-into-dji-ronin-rs-2-and-rsc-2/#respond Sun, 27 Jun 2021 17:51:32 +0000 https://pixelfriedhof.com/?p=4513 I use the Capture Clip carrying system from Peak Design on all my cameras. All my tripod heads are compatible with the Capture Clip. Only for the DJI Ronin RSC 2 I have to change my system every time. I will show you how to use your camera with Peak Design Capture Clip directly into the DJI Ronin RS 2 and RSC 2, without any screws. An alternative quick release plate makes it possible.

Der Beitrag Insert Peak Design Capture Clip into DJI Ronin RS 2 and RSC 2 erschien zuerst auf Pixelfriedhof.

]]> I use the Capture Clip carrying system from Peak Design on all my cameras. All my tripod heads are compatible with the Capture Clip. Only for the DJI Ronin RSC 2 I have to change my system every time. I will show you how to use your camera with Peak Design Capture Clip directly into the DJI Ronin RS 2 and RSC 2, without any screws. An alternative quick release plate makes it possible.

All we need is an alternative quick release plate 3061 from SmallRig *. This replaces the standard quick release plate from DJI.

Special offer
SMALLRIG RS2/RSC2/RS3/RS3 Pro/RS4/RS4 Pro Quick Release Plate Schnellwechselplatte mit Arca-Swiss für DJI RS 2 / RSC 2 / RS 3 /...
SMALLRIG RS2/RSC2/RS3/RS3 Pro/RS4/RS4 Pro Quick Release Plate Schnellwechselplatte mit Arca-Swiss für DJI RS 2 / RSC 2 / RS 3 /...*
  • Kompatibilität: Das Quick Release Plate ist geeignet für DJI RS 2/RSC 2/RS 3/RS 3 Pro/RS 4/RS 4 Pro , inklusive DJI RS 2/RSC 2...
  • Funktion: Mit der Schnellwechselplatte kann man L-Bracket und Cage mit Arca-Swiss schnell auf das Gimbal montieren, was das Problem der...
−6,50 EUR 28,40 EUR Amazon Prime
Amazon

This allows us to switch between the carrying system, the DJI Ronin or tripod entirely without conversion from the Peak Design carrying system.

In this alternative quick release plate, we can insert the capture clip (or in my case, the Ellie PD camera cage with integrated capture clip *) directly into the DJI RSC 2 or RS 2.

YouTube Video
Ihre Daten werden erst beim Abspielen des Youtube-Videos an den Dienst übermittelt. Your data will only be transmitted to the service when you play the Youtube video.

You’re welcome.

* The links marked in this way are Amazon affiliate links.

Der Beitrag Insert Peak Design Capture Clip into DJI Ronin RS 2 and RSC 2 erschien zuerst auf Pixelfriedhof.

]]> https://pixelfriedhof.com/en/insert-peak-design-capture-clip-into-dji-ronin-rs-2-and-rsc-2/feed/ 0 3 Legged Thing Ellie (PD) on the Nikon Z6, Z7, Z5, Z50, Z6II, Z7II – is it compatible? https://pixelfriedhof.com/en/3-legged-thing-ellie-pd-on-the-nikon-z6-z7-z5-z50-z6ii-z7ii-is-it-compatible/ https://pixelfriedhof.com/en/3-legged-thing-ellie-pd-on-the-nikon-z6-z7-z5-z50-z6ii-z7ii-is-it-compatible/#comments Tue, 09 Mar 2021 17:32:49 +0000 https://pixelfriedhof.com/?p=4105 Does the L-angle "Ellie (PD)" also fit the Nikon Z6, Z7, Z6II or Z7II?
After all, there is a Z variant of its own with the Zelda bracket. If you are looking for a Peak Design Capture Clip compatible solution, you will find it with the "Ellie PD" bracket.

Der Beitrag 3 Legged Thing Ellie (PD) on the Nikon Z6, Z7, Z5, Z50, Z6II, Z7II – is it compatible? erschien zuerst auf Pixelfriedhof.

]]> Does the L-angle “Ellie (PD)” also fit the Nikon Z6, Z7, Z6II or Z7II?
After all, there is a Z variant of its own with the Zelda bracket. If you are looking for a Peak Design Capture Clip compatible solution, you will find it with the “Ellie PD” bracket.

Compatibility with Nikon Z series cameras

Short and sweet: Yes the „Ellie“ (Amazon Affiliate Link) also fits Nikon Z6, Z7, Z6II and Z7II. Probably it even fits Z5 and Z50. Both the battery flaps and the flaps for the ports on the left side of the camera (MIC, headphones, HDMI, remote shutter, etc.) remain accessible. The rubber flaps can still be opened, closed and tilted to the side when open. No problems at all.

Z6II with Ellie PD and Nikkor 24-70mm 2.8. All bays and ports are clear - everything fits perfectly.
Z6II with Ellie PD and Nikkor 24-70mm 2.8. All bays and ports are clear – everything fits perfectly.

Compatibility with FTZ adapter

The Ellie PD (Amazon Affiliate Link) is not only compatible with the FTZ adapter, it enables the use of an adapter plate on the camera with simultaneous FTZ adapter use.

For example, I myself use a Peak Design Capture Clip System ARCA adapter plate attached to the camera (Amazon affiliate link). When this adapter is screwed to the camera and I put on the FTZ adapter, the FTZ adapter blocks the adapter plate: I can no longer slide the adapter plate into tripod head or support system.

Sure, I could screw the adapter plate directly onto the FTZ adapter, but if I then switch to a Z lens, I would also have to alter the adapter plate again. That is too inflexible for me. I was looking for a way to still have a working adapter plate on the camera itself, despite possibly having the FTZ adapter on. Ellie and Ellie PD brought the solution.

The PD version of the Ellie has the ARCA plate of the Peak Design Capture System (Amazon Affiliate Link) already integrated. On the normal Ellie (without PD) you can screw on any adapter plate. The result is the same.

The Ellie PD increases the distance from the table to the bottom of the FTZ adapter. The FTZ adapter no longer blocks the adapter plate.
The Ellie PD increases the distance from the table to the bottom of the FTZ adapter. The FTZ adapter no longer blocks the adapter plate.

In both cases, the oversize of the pure Ellie angle without adapter plate already provides additional distance between the underside of the FTZ adapter and the underside of a mounted adapter plate. As a result, the FTZ adapter no longer blocks insertion into the support system or tripod head.

Finally, I can slide the Z6II back into the carrying system - whether with FTZ adapter or without.
Finally, I can slide the Z6II back into the carrying system – whether with FTZ adapter or without.

If this information has helped you, you are welcome to purchase the mentioned accessories via the following affiliate links.

3 Legged Thing Ellie PD Universeller Schnellwechselwinkel, Peak Design Capture-kompatibel - Kupfer (Orange)
3 Legged Thing Ellie PD Universeller Schnellwechselwinkel, Peak Design Capture-kompatibel - Kupfer (Orange)*
  • Universeller Peak-Design-kompatibler Schnellwechselwinkel für spiegellose und DSLR-Kameras
  • Zwei unterschiedliche Gewinde-Slots für optimale Ausrichtung der Kamera
90,20 EUR
Amazon
Peak Design Capture Camera Clip V3 Schwarz, inkl. Standard Plate (CP-BK-3)
Peak Design Capture Camera Clip V3 Schwarz, inkl. Standard Plate (CP-BK-3)*
  • Mit dem Capture Camera Clip muss deine Kamera nie wieder in die Tasche, sondern ist jederzeit in Reichweite für das perfekte Foto....
  • Vom Capture Clip lösen - und unmitelbar am Arca-Stativ einsetzen. Möglich dank der kompatiblen Schnellwechselplatte.
79,90 EUR Amazon Prime
Amazon

Der Beitrag 3 Legged Thing Ellie (PD) on the Nikon Z6, Z7, Z5, Z50, Z6II, Z7II – is it compatible? erschien zuerst auf Pixelfriedhof.

]]> https://pixelfriedhof.com/en/3-legged-thing-ellie-pd-on-the-nikon-z6-z7-z5-z50-z6ii-z7ii-is-it-compatible/feed/ 1