It took me a little time to finally find the right settings for the Homematic module HMIP-MOD-HO (Amazon Affiliate Link) in Yahka. Finally, the garage door control now works via Apple’s Home app and Siri.

Once the device is set up in the Yahka adapter, we focus on the CurrentDoorState -> DOOR_STATE and TargetDoorState -> DOOR_COMMAND data points.

Settings for CurrentDoorState

InOut: ioBroker.State
State: hm-rpc.X.XXXXXXXXXXXXXX.1.DOOR_STATE
Conversion: map
0 -> is simple value 1
1 -> is simple value 0
2 -> is simple value 2
3 -> is simple value 3

Settings for TargetDoorState

InOut: ioBroker.State
State: hm-rpc.X.XXXXXXXXXXXXXX.1.DOOR_COMMAND
Conversion: map
1 -> 0 (don’t check “is simple value”)
3 -> 1 (don’t check “is simple value”)

Der Beitrag Configure Homematic module HmIP-MOD-HO in Yahka for Apple Homekit erschien zuerst auf Pixelfriedhof.

The HmIP-MOD-HO module (Amazon Affiliate Link) can be connected out-of-the-box to various Hörmann garage door operators and can then be stored directly in the housing of the Hörmann operator. The connection is made via the existing BUS interface in the drive. Insert the cable, teach the device to the CCU, and you’re done.

The module HmIP-MOD-HO (Amazon Affiliate Link) then supports the functions open, close, stop and also the approach of a ventilation position. Of course, the module reports the current status of the gate, so you no longer have to use a signaling contact to query the status.

Link: With this tutorial the module can be controlled via ioBroker and Yahka adapter also via Apple’s Homekit.

Supported Hörmann drives:

– SupraMatic series 3 E/P/HT beginning from Index Ci
– RotaMatic/P/PL series 1 since09/2010) and series 2
– LineaMatic/H/P series 1 (since 10/2009) and series 2
– SupraMatic/ProMatic series 4 (HCP-Adapter required, Hörmann-Item-Nr. 4510204)
– VersaMatic/P
– WA300 S4
– WA300 RS4/WA 300 AR S4

Presentation of HmIP-MOD-HO module in video:

In this video you can get an impression of the new garage door module.

Ihre Daten werden erst beim Abspielen des Youtube-Videos an den Dienst übermittelt. Your data will only be transmitted to the service when you play the Youtube video.

Der Beitrag Controlling Hörmann garage door drives with integrable Homematic module erschien zuerst auf Pixelfriedhof.

To remove the coupling completely, we dial in as root user at the CCU using a SFTP client. Here we delete the directory /usr/local/etc/config/eshlight.

It is important that we restart the CCU now. After that, there should be no more traces of a former pairing with a Hue Bridge in the system and the log entries should be a thing of the past.

You are now one step closer to a tidy CCU.

Der Beitrag Homematic CCU HUE Log: „Please configure a valid user or remove user from configuration to generate a new one“ erschien zuerst auf Pixelfriedhof.

First I looked for the cause of the error in ioBroker and checked the settings of the IoT adapter and requested new certificates. Unfortunately, none of this helped, but it should be tested.

I was only able to solve the problem by deactivating the Alexa skill and reactivating the ioBroker skill in the Alexa app. The best thing is that you do not have to reconfigure your devices in the Alexa app, the previous devices and settings are retained.

After reactivation, all devices will work again.

Der Beitrag “Something went wrong” when operating io.Broker devices via Alexa erschien zuerst auf Pixelfriedhof.